We are glad to inform you that among our products there is an expander shower rod . A wide color range of expander shower rods is available: anodized covering (silver, gold, bronze colors), polymerous covering (white, beige, blue, pink, light green, grey, dark blue, dark green, claret, peachy, turquoise, dark brown).

This rod is possible to be installed in any bathroom with the distance between walls from 1,25 to 2,0 meters.

The rod is produced of aluminium tubes, completely rustproof. A convenient spring loaded shower rod that can be installed without drilling and screws.

Aluminium rod is sold with transparent flexible vinyl rodheads, which prevent sliding of the rod off the walls. Surface should be flat and smooth for the accessory to fix correctly. The aluminium rod is supplied with oval curtain rings.

The rod is easy to be installed between two walls at the distance from 110 to 200 cm. A convenient shower rod can be installed without drilling and screws.

Remove the new rod from its packaging, and hold it in position between the opening. For packaging purposes, these rods are usually compressed to their smallest length. You will need to twist the rod clockwise to extend it to the correct length for your wall opening. Keep checking the length against the opening measurement. The rod should be slightly longer than the opening so that it will fit tightly and not slip. If it is too long, twist counter-clockwise, and the length will lessen.

Once the rod is the correct length to fit the opening, compress one end and allow it to “pop” into place on the corresponding side. The rod should be taut. Check to make sure that you can’t easily pull it down. Once you are satisfied the rod is secure, install the hooks and curtains. This completes the process.